How to Reduce Your Saab Key Replacement Cost
Getting your spare key copied prior to losing the previous one can save you huge cost. If you have only one key, it's 2X-10X as expensive to make an entirely new one.
It's simple, inexpensive and simple to change the battery in your SAAB 9-3 remote. Here's how.
Cost of Replacement Key
The 03-11 SAAB 9-3 is a fantastic car but the ignition key can be susceptible to wear down. The case can become sticky and the buttons can fall out. This can cause issue when driving. This is the reason it's best to replace the key fob as quickly as you notice any problems. This will save you a lot of money in the end, and it's also better than putting off the task.
Replacing a SAAB key fob is not difficult and you can do it yourself for less than $100. You will need to purchase a replacement shell for your key fob, which is compatible with your vehicle, as well as a new battery. It is necessary to open the case of your existing SAAB 9-3 key fob and carefully remove the electronics to give the opportunity to replace the battery. After removing the electronics, you can simply replace the battery and then synchronize the key fob to your vehicle.
SAAB keys that come with a remote start feature require special attention since they feature transponder chips which needs to be programmed for your specific vehicle. To do this, you'll need a dealer-grade tool called the Tech 2 or the equivalent for your model of Saab. The tool can scan the code of your keys, and use this information to program your new key. If you don't have a spare key available, this procedure is more complex and can cost you up to $500 from the dealer.
It is recommended to find an locksmith who works with Saabs. These professionals will be able to make you a new key at an affordable cost compared to the dealer. They can also provide other services, including key replacement or duplication to ensure you have a backup key in case yours is lost or damaged.
Most European cars made after 2000 are equipped with immobilizer systems that rely on a microchip built inside the key to identify and start your car. These keys are more expensive to duplicate as they are equipped with chip. However, there are a few exceptions. VATS keys, for example (which are mechanical with a resistor in them) do not require programming and can be duplicated fairly inexpensively. However, the majority of post-2000 BMWs, Mercedes, Porsches and Saab vehicles will require an authorized dealer to duplicate their keys. This is because these manufacturers do not permit their dealers to participate in NASTF which is the organization which makes the tools other automotive locksmiths make keys that can be used to replace their customers' keys.
Cost of Replacement Remote
If you own a Saab car with keyless entry, it may be important to have a spare key or remote. This will give you one in the event that your original key is lost or damaged. If you have insurance that covers key add-ons it will reduce the cost of replacing a remote.
The majority of car keys made after 2000 can be programmed by a dealer or locksmith. Most of the time, these keys are locked in a small EEPROM chip that can only be read by an appropriate computer designed specifically for this purpose. This means that if you require an additional key for your vehicle you have to visit the dealer. The good news is that the dealer isn't going to cost as much as a locksmith.
Saab 9-3s are beautiful cars and a large number of them are still in operation in the present. The ignition key is probably the biggest issue for these cars. The key is small and poorly designed, and is easy to lose it or become stuck. In reality, a lot of people find themselves without a functioning key after only a few years of owning their car.
Luckily, you can get an extra key for your SAAB and it is a simple process. The first step is to remove the emergency key from the SAAB 9-3. It's a simple job you can do yourself, and you don't need any tools. saab 9 3 key replacement should be careful, though as if you press it too hard then you could cause damage to the electronics inside it.
The next step is to find a place where you can purchase an OEM replacement key case for your SAAB. They aren't always easy to find, but once you know where to look, you will be able to locate one easily. Once you have found a replacement key case, you will need to have it cut and programmed to your car.
It's costly to purchase a brand new SAAB key however the cost is worth it. It's much less expensive and faster than having to replace the entire vehicle. If you're stuck with one key that works, it's best to get it replaced in the earliest time possible. You never know when it will be lost, and that can cause a lot of frustration and cost.